Table of Contents
Advertisement
— Green colour indicates that this an encrypted channel.
— Green colour indicates that the channel is locked via channel lock.
— Indicates that the current aspect ratio is broadcasted in 4:3 format.
— Indicates that the current aspect ratio is broadcasted in 16:9 format.
— Green colour indicates the presence of Dolby Digital audio stream.
— Green colour indicates the presence of subtitles for the hearing impaired.
The information banner is automatically removed from the screen after a certain time, specified by the
setting for Banner timeout within the Time Setting menu. For details refer to chapter 6.3.3.
noTE:
Event information will be displayed when available. Availability depends on the broadcast.
5.3.2 Extended information banner
To display extended information press
The following information will be provided:
On top of the frame you will see the name of the channel.
„
„
Below you will find the frequency, bandwidth and signal indicators of the channel.
„
„
In the 2nd half of the screen you will find the event description. Use t/u to switch between
„
„
the current Now and Next event. If the complete information exceeds the displayed area use
p/q in order to read.
i
To exit press
or ExIT.
noTE:
Event information will be displayed when available. Availability depends on the broadcast.
5.4 Electronic Tv programme guide (Epg)
This function gives you the opportunity to view the programme schedules of digital terrestrial channels
for up to 7 days. To open the EPG, press Epg in viewing mode.
Use p/q to select a channel and t/u to select an event. Press
the selected event. You can use p/q to scroll the text and ExIT to close this information.
For fast navigating press blUE to show events taking place the next day at the same time. From this
moment on you can also use the YElloW button to go back to the previous day. Alternatively you can
also move from one day to another one by using the t/u buttons across the events. It is not possible to
view information about past programmes.
To choose an event for watching, press ok to open the timer settings. The detailed timer setup is
described in chapter 6.4.1.
After the timer has been set up press ExIT to return to the EPG.
noTE:
Event information will be displayed when available. Availability depends on the broadcast.
5.5 selecting the subtitle language
Press sUb in viewing mode to display a list of available subtitle languages. Use p/q to select the
preferred language and confirm with ok. Please consider that this function supports DVB and TXT
subtitles and this selection is only displaying them temporarily. Subtitles may not be supported by every
channel/broadcaster. Additionally please set your preferred subtitle language as described in chapter
6.3.1 Language Setting.
5.6 Displaying Teletext
To open the Teletext, press the gREEn (TEXT) button in viewing mode. Use the 0-9 buttons to enter a
page number. The coloured buttons allow you to jump directly to the pages as indicated in the bottom
line. You can also use the p/q buttons to select the next/previous page. With the t/u buttons you can
select sub-pages. Press ExIT to close the Teletext.
8
i
again, or twice from viewing mode.
i
to display the detailed information of
Advertisement
Table of Contents
