Channel Search - Strong SRT 8200 Picture similar User Manual

Table of Contents

Advertisement

Delete
Add channel to favourite lists
6.1.2 channel sort
This menu allows you to sort channels by the following methods:
By LCN:
By Service Name:
By Frequency:
By Operator:
6.1.3 Delete all
Use this menu carefully! It will delete all of the stored channels and settings! To execute this function it
will be requested to enter the PIN code (DEfaUlT pIn: 0000). After you have performed this action you
will be guided to the Installation Guide again!
WaRnIng:
The Delete all function will permanently delete all of the stored channels and settings
from your receiver!

6.2 channel search

Within the menu Channel Search you can adjust your search settings and perform an automatic or
manual channel search. Press mEnU and use t/u to select Channel Search, then press ok. You will see
the following submenus displayed: Search Setup, Auto Search and Manual Search.
Use p/q to select a submenu and press ok or u to access.
6.2.1 search setup
In the menu Search setup you can set the Antenna Power and the country in which you live.
Country:
Antenna Power:
10
To delete a channel use the p/q buttons to select the channel, then press the
blUE button. Now you'll be asked if you want to delete this channel. Press ok
to confirm or ExIT to cancel. The channel(s) you delete from the channel list
will be removed permanently, also if this channel is part of the favourite list.
To add a channel to a favourite group, use the p/q buttons to select the
channel, then press the fav button. Now the favourite group selection will
be displayed. Select the group to which the channel should be added with
p/q and press ok. The selected channel will be marked with the v symbol.
Additionally you can also select another favourite group where to add this
channel. To do so, press ok at the other group as well. When you have added
this channel to the desired group(s), press ExIT to go back to the channel list.
There you can proceed like this to add other channels to favourite groups.
You can also remove a channel from a favourite group by pressing the fav
button again and selecting the group it is part of. Then press ok to remove the
symbol and the channel will be removed from this (these) favourite group(s).
The channels will be sorted according to the LCN (Logical Channel Numbering)
system, which may be broadcasted in your area. If the operator doesn't support
LCN your channel numbers will start by channel number 800, otherwise the LCN
channels will be sorted in regional order starting with 1. None LCN channels can be
found again starting with number 800. Further the LCN method will allow you to
save the strongest channels broadcasted in your area, only.
The channels will be sorted in alphabetical order.
The channels will be sorted in ascending order of the frequency on which they
are broadcasted.
The channels will be sorted by the operator ID.
Use the t/u buttons to change the country.
If you use an antenna which can be amplified (i.e. an active indoor/outdoor
antenna) and it requires a voltage of 5 V and doesn't consume more than
50 mA, then you can set the Antenna power to On. If you use an antenna
without an amplifier or your antenna is already amplified by an external power
supply or if you are using an antenna from a house distribution system, please
keep Antenna power Off.

Advertisement

Table of Contents
loading

Table of Contents