Jumper Settings For Cmos Clear; Jumper Settings For Display Type - DFI G586IPV User Manual

inches. All cables (for floppy drive, hard drive, CD-ROM, etc.) must be
routed clear of the CPU and its airspace.
Fan Exhaust
The CPU must be kept cool by using a fan with heatsink. The tempera-
ture of the air entering the fan/heatsink cannot exceed 45
The ambient or room temperature must be below 37

Jumper Settings for CMOS Clear

Jumper JP5
CMOS Clear
If, for some reason, the CMOS becomes corrupted, the system can be
reconfigured with the default values stored in the CMOS RAM. To load
the default values, power off your system and set JP5 to On. Power on
your system. After you have boot up an operating system, turn it off
again. Set JP5 back to its default setting, Off.
Off: Normal (default)

Jumper Settings for Display Type

Jumper JP3
Display Type Select
Jumper JP3 sets the display adapter to color or mono. This jumper
must match the type of display adapter installed. If you change your
video adapter, make sure this jumper is changed accordingly.
3
1-2 On: Color (default)
24
2 1
o
C (113
o C (99 o F).
On: CMOS Clear
3 2
1
2-3 On: Mono
o
F).