Jumper Settings for CMOS Clear
Jumper JP1
CMOS Clear Select
If, for some reason, the CMOS becomes corrupted, the system can be
reconfigured with the default values stored in the ROM BIOS. To load
the default values, power off your system and set JP1 pins 2 and 3 to
On. Power on your system. After you boot up an operating system, turn
your system off again. Set JP1 back to its default setting, 1-2 On.
3
2
1
1-2 On: Normal
(default)
3
2
1
2-3 On: CMOS Clear
27