Jumper Settings Of Internal/External/Cmos Clean, Display Type And Diagnostic/Password Clear - DFI 486-OCV Plus User Manual

Pentium OverDrive Ready System Board
TM
* If Jumper JP34 is set to Delay 1 PCLK, the 486-OCV
Plus will only support one VL-Bus Master in Slot
SL2.
Jumper Settings of Internal/External/CMOS Clean, Display Type
and Diagnostic/Password Clear
Jumper J11 enables or disables the internal battery,
external battery or CMOS Clean. JP29 allows you to
select between a color or monochrome display. JP39
allows you to perform diagnostic test and clear the
password.
Locations of Jumpers J11, JP29 and JP39
on the 486-OCV Plus System Board
2-11 u Installation Overview
OPTi
82C499
JP39
JP29
J10
J11