Video Off Method - DFI G586IPV User Manual

Video Off Method

This determines the manner in which the monitor is blanked.
V/H This selection will cause the system to turn off the vertical and
SYNC + horizontal synchronization ports and write blanks to the video
Blank buffer.
Blank This option only writes blanks to the video buffer.
Screen
DPMS Initializes display power management signaling.
MODEM Use IRQ
This category is used to set an IRQ channel (IRQ 3, 4, 5, 7, 9, 10 or
11) for the modem installed in your system.
Doze Mode, Standby Mode, Suspend Mode and HDD Power Down
These Green PC power saving categories are user configurable only
when the Power Management category is set to User Defined.
Doze When enabled and after the set time of system inactivity, the
Mode CPU clock will run at a slower speed while all other devices
still operate at full speed.
Standby When enabled and after the set time of system inactivity, the
Mode fixed disk drive and the video will be shut off while all other
devices still operate at full speed.
Suspend When enabled and after the set time of system inactivity, all
Mode devices except the CPU will be shut off.
HDD This is used to define the continuous HDD idle time that
Power elapses before the HDD enters the power saving mode (motor
Down off). When enabled and after the set time of system inactivity,
the hard disk drive will be powered down while all other de-
vices remain active.
41