Power Management Setup; Pm Control By Apm - DFI G586IPV User Manual

Power Management Setup

Power Management Setup allows you to configure your system to most
effectively save energy.
Power Management

PM Control by APM

Video Off Method
MODEM Use IRQ
Doze Mode
Standby Mode
Suspend Mode
HDD Power Down
** Wake Up Events In Doze & Standby **
IRQ3 (Wake-Up Event)
IRQ4 (Wake-Up Event)
IRQ8 (Wake-Up Event)
IRQ12 (Wake-up Event)
Power Management
This category allows you to select the type (or degree) of power
saving by changing the length of idle time that elapses before each
of the following modes are activated: Doze Mode, Standby Mode,
and Suspend Mode.
Disable No power management. Disables the Doze, Standby and
(default) Suspend modes.
Min. Power Minimum power management. Doze Mode = 1 hr., Standby
Saving Mode = 1 hr., and Suspend Mode = 1 hr.
Max. Power Maximum power management. Doze Mode = 1 min.,
Saving Standby Mode = 1 min., and Suspend Mode = 1 min.
User Allows you to set each mode individually. When enabled,
Defined each option ranges from 1 min. to 1 hr.
PM Control by APM
Yes An Advanced Power Management device will be activated to
enhance the Max. Power Saving mode and stop the CPU' s
internal clock. (default)
N o The system BIOS will ignore APM when initiating the Power
Management mode.
40
ROM PCI/ISA BIOS
POWER MANAGEMENT SETUP
AWARD SOFTWARE, INC.
** Power Down & Resume Events **
: User Define
IRQ3 (COM 2)
: Yes
IRQ4 (COM 1)
: V/H SYNC+Blank
IRQ5 (LPT 2)
: 3 IRQ6 (Floppy Disk)
IRQ7 (LPT 1)
IRQ8 (RTC Alarm)
: Disabled
IRQ9 (IRQ2 Redir)
: Disabled IRQ10 (Reserved)
IRQ11 (Reserved)
: Disabled
IRQ12 (PS/2 Mouse)
: Disabled
IRQ13 (Coprocessor)
IRQ14 (Hard Disk)
IRQ15 (Reserved)
: On
ESC :Quit
: On
F1 :Help
: On
F5 :Old Values
: On
F6 :Load BIOS Defaults
F7 :Load Setup Defaults
: On
: On
: On
: On
: On
: Off
: On
: On
: On
: On
: On
: On
: Off
↑ ↓ → ←
:Select Item
:Modify
PU/PD/+/-
:Color
(Shift) F2