Chapter 1: Introduction - DFI G586IPV User Manual

Chapter 1
Introduction
The G586IPV, equipped with a 321-pin Zero Insertion Force (ZIF) CPU
socket, is Pentium processor-class system board supporting Intel Pen-
tium CPUs running at 75MHz, 90MHz, 100MHz, 120MHz, 133MHz,
150MHz, 166MHz and 200MHz frequencies. The G586IPV also sup-
ports Cyrix 6x86 P120+/P133+/P150+/P166+ and AMD-K5 PR75/PR90/
PR100/PR120/PR133 CPUs.
The G586IPV can support 8MB to 128MB of system memory. It is
equipped with 4 SIMM sockets using EDO or fast page mode x32
DRAM. Your system board may also come with a DIMM socket that
uses x64 EDO, fast page mode or SDRAM. The G586IPV also supports
256KB or 512KB pipeline burst SRAM and provides easy cache up-
grades using a 256KB cache module.
The G586IPV design is based on the Peripheral Component Intercon-
nect (PCI) local bus and Industry Standard Architecture (ISA) stan-
dards. It is equipped with 4 dedicated PCI slots and 3 dedicated 16-bit
ISA slots.
The G586IPV board has two bus master PCI IDE connectors. Bus mas-
tering reduces CPU use during disk transfer. This system board is also
equipped with two NS16C550A-compatible serial ports, an SPP/ECP/
EPP parallel port, a floppy disk drive controller, one PS/2 mouse port,
one PS/2 or AT keyboard connector, two connectors for external USB
ports and one IrDA header for wireless connectivity between your com-
puter and peripheral devices.
5