Table of Contents
Advertisement
inches. All cables (for floppy drive, hard drive, CD-ROM, etc.) must be
routed clear of the CPU and its airspace.
Fan Exhaust
The CPU must be kept cool by using a fan with heatsink. The tempera-
ture of the air entering the fan/heatsink cannot exceed 45
The ambient or room temperature must be below 37
Jumper Settings for CMOS Clear
Jumper JP5
CMOS Clear
If, for some reason, the CMOS becomes corrupted, the system can be
reconfigured with the default values stored in the CMOS RAM. To load
the default values, power off your system and set JP5 to On. Then
power on your system for 5 seconds and turn it off again. Set JP5 back
to its default setting, Off.
Off: Normal (default)
Jumper Settings for Display Type
Jumper JP3
Display Type Select
Jumper JP3 sets the display adapter to color or mono. This jumper
must match the type of display adapter installed. If you change your
video adapter, make sure this jumper is changed accordingly.
3
2
1-2 On: Color (default)
24
On: CMOS Clear
1
o
o
C (113
F).
o
C (99
o
F).
3
2
1
2-3 On: Mono
Advertisement
Table of Contents
