Normal Mode - DFI G586IPV User Manual

HARD DISKS TYPE SIZE CYLS HEAD RECOMP LANDZ SECTOR MODE
Primary Master:
Select Primary Master Option (N=Skip): N
OPTIONS SIZE CYLS HEAD
2 (Y) 853
1 853
3 853
Note: Some OS (like SCO-UNIX) must be "NORMAL" for installation
Enter your choice, and press <Enter> to accept the parameters or press
<Esc> to abort. The parameters of the hard disk will be displayed in the
Standard CMOS Setup.
Hard Drive Mode
The system board supports three HDD modes: Normal, LBA and Large.
If your hard disk drive does not support LBA mode, the " LBA" option will
not be displayed. If your HDD has 1024 or fewer cylinders, the " Large"
option will not be displayed. If your hard drive is larger than 2.1GB, be
sure that your operating system supports it or you may need to create
separate partitions.

Normal Mode

Normal mode is the generic access mode in which neither the BIOS nor
the IDE controller will make any transformations during hard-drive ac-
cess.
The maximum number of cylinders, heads and sectors for Normal mode
are 1024, 16 and 63, respectively.
x no. Heads
x no. Sectors
x bytes per sector
ROM PCI/ISA BIOS
CMOS SETUP UTILITY
AWARD SOFTWARE, INC.
RECOMP LANDZ SECTOR
827 32 0 1653
1654 16 65535 1653
827 32 65536 1653
ESC: Skip
no. Cylinders (1024)
( 16)
( 63)
( 512)
528 megabytes
MODE
63 LBA
63 Normal
63 Large
49