Speaker; Line Out; Composite Output (Video) - AMX AVX-400 Operation/Reference Manual

SPEAKER

FIG. 21 SPEAKER output
The SPEAKER output is capable of delivering 2x10W into 8 ohm amplified variable stereo audio. The output level can
be adjusted by serial or AxLink commands.

LINE OUT

FIG. 22 LINE OUT output
The LINE OUT output provides the mixed program and line input sources at a variable line level output. It is designed
for use with external audio equipment such as induction loop systems, recording devices, or video conferencing systems.
Destination devices require either balanced (differential) or unbalanced (single-ended) connections. FIG. 23 illustrates
options for wiring between output connectors and the destinations.
Balanced wiring
FIG. 23 Stereo 5-terminal wiring

Composite Output (VIDEO)

FIG. 24 Composite output
The composite output enables you to use a composite cable (RCA Y) to send video to a display device like a projector.
Attach the composite cable to the composite video connector on the rear of the presentation switcher and run the other
end of the cable to the Composite connector (normally yellow) on the display device or to a Composite wall input plate.
If you connect the port to a wall input plate, use an RJ-45 cable to connect the port on the rear of the wall input plate to
one of the source input ports on the front of the switcher.
AVX-400 Enova Twisted Pair Presentation Switcher Operation/Reference Guide
destination device
AVX-400
Unbalanced wiring
Wiring and Device Connections
13