Installing The Spinner - Black Horse Model BH184 Instruction Manual Book

Instruction manual
Top view

INSTALLING THE SPINNER

Install the spinner back-plate, propeller and
spinner cone.
! The propeller should not touch any part of the
spinner cone. If it dose, use a sharp modeling
knife and carefully trim away the spinner cone
where the propeller comes in contact with it.
- - - 2
95mm
- - - 2
3x8mm Button Head
Cap Screw
- - - 12
Assemble left and right
sides the same way.
HE-111
Close
3x8mm Button Head
Cap Screw
Item code: BH184
Top view
21