BLADE -
ITEM CODE: BH70-A.
Bottom side
4. Install the muffler and muffler extension
onto the engine and make the cutout in the
cowl for muffler clearance. Connect the fuel
and pressure lines to the carburetor, muffler
and fuel filler valve.
Drill a hole
2mm diameter
12
Right side
Trim and
cut after
Right side
spinner cone. The spinner cone is held in
place using two 3mm x 12mm wood screws.
3x12mm.
INSTRUCTION MANUAL
Secure
Right side
Machine screw.
Front view
INSTALLING THE SPINNER.
Install the spinner backplate, propeller and
3 x 12mm