Installing The Spinner - Black Horse Model CAP 232 Instruction Manual Book

CAP 232-
Item code:BH24.
1 2. While keeping the back edge of the
cowl flush with the marks, align the front of
the cowl with the crankshaft of the engine. The
front of the cowl should be positioned so the
crankshaft is in nearly the middle of the cowl
opening. Hold the cowl firmly in place using
pieces of masking tape.
1 3.
Slide the cowl back over the engine
and secure it in place using four wood screws.
See picture below.
1 4. Install the muffler and muffler extension
onto the engine and make the cutout in the
cowl for muffler clearance. Connect the fuel
and pressure lines to the carburetor, muffler
and fuel filler valve.
12
Bottom side.
3 x 12mm.
Instruction Manual

INSTALLING THE SPINNER.

Install the spinner backplate, propeller and
spinner cone. The spinner cone is held in
place using two 3mm x 12mm wood screws.
MAIN GEAR INSTALATION.
PARTS REQUIRED
3 x 12mm.
Secure.