Table of Contents
Advertisement
7-5-3 Attaching a UHF Portable
Tuner (for a UHF Wireless
Microphone System)
To use a Sony UHF wireless microphone system, attach
one of the following UHF portable tuners.
• WRR-855A/855B UHF Synthesized Tuner Unit
• WRR-861A/861B/862A/862B UHF Portable Tuner.
For each of these UHF portable tuners, use the following
attachment procedure.
For details, refer to the UHF portable tuner manual.
Fitting the WRR-855A/855B
You can use the WRR-855A/855B UHF Synthesized
Tuner Unit simply by inserting it into the slot in the
camcorder, and fastening the fixing screws.
1
Undo the four fixing screws holding the cover of the
slot, and remove the cover.
2
Insert the WRR-855A/855B, and fasten the four fixing
screws.
WRR-855A/855B
Set the AUDIO IN CH-1/CH-2/CH-3/CH-4 switches for the
desired audio recording channel to WIRELESS or W.
For the operation of the WRR-855A/855B, refer to the
manual supplied with the WRR-855A/855B.
Fitting the WRR-861A/861B/862A/862B
(with a battery pack)
1
(1) Attach the WRR tuner fitting (not supplied, service
part number: A-8278-057-A) to the back of the
camcorder.
1 Use a Phillips-type screwdriver to tighten the
four screws placed in the tuner fitting. For three
of these screws, insert the screwdriver through
the corresponding hole and tighten the screw.
2 Loosen the adjustment screws.
3 Adjust the tuner fitting position for a battery
pack to be attached, and tighten the adjustment
screws to fix its position.
4 Attach the mount plate supplied with the WRR-
861A/861B/862A/862B.
(2) Attach the battery pack.
For details about attaching the battery pack, see "7-1-
1 Using a Battery Pack" on page 117.
Battery Pack
Adjustment screws
Back of camcorder
2
Mount the tuner on the WRR tuner fitting.
Mount plate (supplied
with WRR-861A/
861B/862A/862B)
Screwdriver
WRR-861A/861B/
862A/862B
125
Audio Input System
Advertisement
Table of Contents
