Recording Good Shot Marks - Sony HDW-790P Operation Manual

For details, see "3-2-8 Searching for the Last Recorded
Portion and Turning on Recording Pause Mode (End
Search Function)" on page 50.
1
Looking in the viewfinder, press the PLAY button to
start playback.
2
Press the STOP button at the desired point to begin
recording. To continue from the end of a recording
already on the tape, press the STOP button
immediately after the end of the previously recorded
segment (within 0.5 seconds).
3
Press the RET button.
The tape will rewind and will be positioned at the
desired point to continue recording.
4
Press the VTR START button on the camcorder or the
VTR button on the lens to start recording.

3-2-3 Recording Good Shot Marks

Good shot marks 1 and 2 are recorded on the LTC-UBIT
area of the tape when the RET button on the lens is pressed
during recording. Recording shot marks
scenes containing important images and sounds enables
quick access to the marked points. This increases editing
efficiency.
For detailed information on shot marker operations, refer
to the manual supplied with your VTR.
A setting on the SHOT MARKER page of the
MAINTENANCE menu determines whether or not good
shot marks are recorded to the tape.
1) Shot mark
Time code of the scene to be used as the editing point when editing.
38
Recording
Setting for recording good shot marks on
the LTC-UBIT area on the tape
1
2
1)
1 and 2 for
3
MENU knob
Open the switch cover first. Set the MENU ON/OFF
switch to ON while pushing the MENU knob.
The TOP menu appears.
Turn the MENU knob to move the
MAINTENANCE, then push the MENU knob.
When the MAINTENANCE menu is used for the first
time, the CONTENTS page appears.
Or, if you have used the MAINTENANCE menu
before, the page that was on the screen when the last
MAINTENANCE menu operation ended appears.
When the CONTENTS page is displayed, push the
MENU knob once, and then turn the MENU knob to
b
move the mark to SHOT MARKER.
Or, turn the MENU knob until SHOT MARKER
appears from the CONTENTS page.
Switch cover
MENU ON/OFF switch
b
mark to