4
Push the MENU knob.
The TIME ADJUST setting window appears.
Item
Description
HOUR
Sets the hour value.
MIN
Sets the minutes value.
SEC
Sets the seconds value.
YEAR
Sets the year.
MONTH
Sets the month.
DAY
Sets the day.
5
b
Turn the MENU knob to move the
mark to the item
you want to set, then push MENU knob.
b
The
mark on the left of the selected item changes to
a z mark, and the z mark on the left of the setting
changes to a ? mark.
6
Turn the MENU knob to display the desired value,
then push the MENU knob.
b
The z mark returns to a
mark, and the ? mark
returns to a z mark.
7
To continue the remaining settings, repeat steps 5 and
6.
8
When you finish making settings, turn the MENU
b
knob to move the
mark to OK, then push the MENU
knob.
The internal clock is set with the date and time set in
steps 5 to 7. The TIME/DATE page of the
DIAGNOSIS menu appears again. The time set on the
TIME ADJUST setting window is displayed.
To cancel the setting
b
Before executing step 8, move the
mark to ESC at the
top right of the window then push the MENU knob.
Alternatively, push the CANCEL/PRST / ESCAPE switch
down to the ESCAPE side.
All settings or changes are discarded and the TIME/DATE
page of the DIAGNOSIS menu appears.