Recording The Recording Start Time Code Onto The Memory Label - Tele-File; Recording The Recording Start Time Code Onto The Memory Label; Recording A Tele-File Mark (Ok/Ng/Kp) Onto The Memory Label - Sony HDW-790P Operation Manual

HD monitor
HD-SDI input
connector
HD monitor
Video input connector
52
Recording the Recording Start Time Code onto the Memory Label — Tele-File
HDW-790/790P
HD-SDI OUT
TEST OUT
3-4 Recording the
Recording Start Time
Code onto the Memory
Label — Tele-File
The VTR section is compatible with the Tele-File memory
label system. This system allows you to record the
recording start time code, model name, serial number and
tape format onto an optional MLB-1M-100 memory label.
Also, a Tele-File mark, that is, a rating of the images
recorded just before they are recorded, can be recorded
onto the memory label with the recording start time code,
every time the unit enters the recording pause mode.
This is very helpful for management of the cassette tapes
and to improve the efficiency of tape editing.
The memory label attached to the cassette is detected
automatically.
3-4-1 Recording the Recording Start
Time Code onto the Memory Label
1
Insert the cassette onto which the MLB-1M-100
memory label has been attached into the camcorder.
Memory label
Window outwards
Cassette holder
2
Press the VTR START button or the VTR button on the
lens.
At the instant the recording starts, the time code of the
recording start is recorded on the memory label.
3-4-2 Recording a Tele-File Mark
(OK/NG/KP) onto the Memory Label
A Tele-File mark, that is, a rating of the images recorded
just before they are recorded, can be recorded onto the
memory label with the recording start time code, every
time the unit enters the recording pause mode.