Table of Contents
Advertisement
5-5-3 Attaching a UHF Portable Tuner (for a UHF
Wireless Microphone System)
To use a Sony UHF wireless microphone system, fit the WRR-28M/810/
860 UHF Portable Tuner. For each of these UHF portable tuners, use the
following attachment procedure. (The WRR-28M is taken as an
example below.)
Refer to the UHF portable turner manual for more information.
Using a BP-L60 / L90 Battery Pack
1
(1) Attach the supplied tuner fitting to the back of the camcorder.
1 Pass a screwdriver through the holes and tighten the screws.
2 Loosen the adjustment screws.
3 Adjust the metal fitting position for a BP-L60/L90 Battery
Pack to be attached, and tighten the adjustment screws to fix
its position.
4 Attach the BETACAM holder kit supplied with the tuner.
(2) Attach the battery pack.
For more information about attaching the BP-L60/L90 Battery Pack, see
Section 5-1-1 "Using a BP-L60/L90 Battery Pack" (page 5-1).
WRR tuner fitting
Back of camcorder
Adjustment screws
L O C K
Holes
Chapter 5 Setting Up the Camcorder
BP-L60 / L90
BETACAM
holder kit
(Continued)
5-23
5
Advertisement
Table of Contents
