Table of Contents
Advertisement
No.
Page
Item
M08
AUDIO-3
AU SG (1kHz)
MIC CH1 LEVEL
MIC CH2 LEVEL
REAR1/WRR
LEVEL
REAR2/WRR
LEVEL
AUDIO SELECT
CH3
AUDIO SELECT
CH4
LVL CONTROL CH3 0 to 100
Settings
Default
ON/OFF/AUTO
OFF
SIDE1/FRONT/
FRONT
F+S1
SIDE2/FRONT/
FRONT
F+S2
SIDE1/FRONT/
SIDE 1
F+S1
SIDE2/FRONT/
SIDE 2
F+S2
AUTO/MANU
AUTO
AUTO/MANU
AUTO
70
Description
Sets whether to output a 1 kHz test tone
during the Color Bar mode or not.
ON: a 1 kHz test tone is output during the
Color Bar mode.
OFF: a 1 kHz test tone is not output during
the Color Bar mode.
AUTO: a 1 kHz test tone is output only when
the CH 1 AUDIO SELECT switch on the
inside panel is in the AUTO position.
When recording the front microphone sound
on audio channel CH-1, select which control
is to be used for the level adjustment.
SIDE 1: Adjust it with the LEVEL control (left
side) on the side panel.
FRONT: Adjust it with the MIC LEVEL control
on the front panel.
F + S1: It can be adjusted using either the
LEVEL control (left side) or the MIC
LEVEL control. (The two controls are
linked to each other.)
When recording the front microphone sound
on audio channel CH-2, select which control
is to be used for the level adjustment.
SIDE 2: Adjust it with the LEVEL control (right
side) on the side panel.
FRONT: Adjust it with the MIC LEVEL control
on the front panel.
F + S2: It can be adjusted using either the
LEVEL control (right side) or the MIC
LEVEL control. (The two controls are
linked to each other.)
Selects any of these controls to adjust the
audio level of the equipment that is connected
to the wireless microphone and whatever is
connected to the AUDIO IN CH1 connector
on the rear panel.
SIDE 1: Adjust it with the LEVEL control (left
side) on the side panel.
FRONT: Adjust it with the MIC LEVEL control
on the front panel.
F + S1: It can be adjusted using either the
LEVEL control (left side) or the MIC
LEVEL control. (The two controls are
linked to each other.)
Selects any of these controls to adjust the
audio level of the equipment that is connected
to the wireless microphone and whatever is
connected to the AUDIO IN CH2 connector
on the rear panel.
SIDE 2: Adjust it with the LEVEL control (right
side) on the side panel.
FRONT: Adjust it with the MIC LEVEL control
on the front panel.
F + S2: It can be adjusted using either the
LEVEL control (right side) or the MIC
LEVEL control. (The two controls are
linked to each other.)
Selects either automatic operation or manual
operation to adjust the audio recording level
of audio channel 3.
Selects either automatic operation or manual
operation to adjust the audio recording level
of audio channel 4.
Adjusts the audio recording level of audio
channel 3 in manual operation mode.
159
Menu List
Advertisement
Table of Contents
