Table of Contents
Advertisement
CH-1/2 /
MONITOR
CH-3/4 switch
switch
position
position
CH-1/2
CH-1
MIX
CH-2
CH-3/4
CH-3
MIX
CH-4
f MONITOR volume control
Adjusts the speaker or earphone volume for sounds other
than the alarm sound. At the minimum position, no sound
can be heard.
i LEVEL (CH-1/CH-2) (audio channel-1 and
channel-2 recording level) controls
Adjust the audio levels of channels 1 and 2 when the
AUDIO SELECT switches are set to MANUAL.
Audio output
Audio channel 1
Mix sound of channels 1 and 2
Audio channel 2
Audio channel 3
Mix sound of channels 3 and 4
Audio channel 4
i LEVEL (CH-1/CH-2) controls
j AUDIO SELECT (CH-1/CH-2) switches
k AUDIO IN CH-1/CH-2/CH-3/CH-4 switches
l CUE IN switch
m LINE / AES/EBU / MIC selectors
n +48V/OFF switches
o AUDIO OUT connector
p AUDIO IN CH1/CH2 connectors
q DC OUT 12V connector
Audio functions (2)
g ALARM volume control
Adjusts the speaker or earphone alarm volume. At the
minimum position, no sound can be heard.
Minimum
h Built-in speaker
The speaker can be used to monitor E-E sound during
recording, and play back sound during playback. The
speaker also sounds alarms to reinforce visual warnings.
If you connect an earphone to the EARPHONE jack, the
speaker is automatically muted.
See "8-4 Operation Warnings" on page 138 for
information about alarms.
j AUDIO SELECT (CH-1/CH-2) (audio channel-1
and channel-2 adjustment method selection) switches
Select the audio level adjustment method for each of audio
channels 1 and 2.
AUTO: Select this setting for automatic adjustment.
MANUAL: Select this setting for manual adjustment.
Maximum
Audio Functions
19
Advertisement
Table of Contents
