Turn The Menu Knob To Move The - Sony HDW-790P Operation Manual

2

Turn the MENU knob to move the

MAN TRIG, then push the MENU knob.
b
The mark on the left of FREEZE MAN TRIG
changes to a z mark and the z mark on the left of the
setting changes to a ? mark.
3
Turn the MENU knob to move the
then push the MENU knob.
The message "PICTURE FREZE OK? YES
appears.
b
At this time, the
4
Turn the MENU knob to move the
(YES flashes at this time), then push the MENU knob.
The picture from the camera at the moment when the
MENU knob is pressed is stored to memory as a
freeze-frame picture.
The freeze-frame picture is displayed on the
viewfinder for the duration specified by FREEZE
STOP TIME, then the video from the camera resumes.
After the freeze-frame picture is stored, the FREEZE
STATUS indication changes from CLEAR to STORE.
Note
When FREEZE is not set to ON, the freeze-frame
picture will not be saved even if you press the MENU
knob in step 4. The message "FREEZE MODE IS
OFF!" appears at this time.
Viewing the stored picture
1
Follow steps 1, 2, and 3 in "Settings to store the video
from the camera as a freeze-frame picture" on page
102 to display the FREEZE MIX page of the
OPERATION menu, and then push the MENU knob.
2
Turn the MENU knob to move the b mark to CAM/
FREEZE SEL, then push the MENU knob.
b
The mark on the left of CAM/FREEZE SEL
changes to a z mark and the z mark on the left of the
setting changes to a ? mark.
3
Turn the MENU knob to set CAM/FREEZE SEL to
FREZE, then push the MENU knob.
The z mark returns to a
returns to a z mark.
4
Turn the MENU knob to move the
FREEZE/MIX SEL, then push the MENU knob.
b
The mark on the left of FREEZE/MIX SEL changes
to a z mark and the z mark on the left of the setting
changes to a ? mark.
104
Adjustments and Settings from Menus
b
mark to FREEZE
b
mark to EXEC,
b
mark is on the left of flashing NO.
b
mark to YES
b
mark, and the ? mark
b
mark to
5
Turn the MENU knob to set FREEZE/MIX SEL to
FREEZE, then push the MENU knob.
The z mark returns to a
returns to a z mark.
The freeze-frame picture stored to memory appears on
the viewfinder.
Mixing the picture stored to memory with
the video from the camera
NO"
1
Store the freeze-frame picture to memory.
2
2 Follow steps 1, 2, 3, and 4 in "Viewing the stored
picture" on page 104.
3
Turn the MENU knob to set FREEZE/MIX SEL to
MIX, then push the MENU knob.
The z mark returns to a
returns to a z mark.
The freeze-frame picture stored to memory and the
video from the camera are mixed and displayed on the
viewfinder.
Distinguishing the freeze-frame picture
from the mixed picture
When CAM/FREEZE SEL is set to FREZE, the picture on
the viewfinder can be identified by the status indication
(FREZ or MIX).
1
Follow steps 1 and 2 in "Settings to store the video
from the camera as a freeze-frame picture" on page
102.
2
If the CONTENTS page is displayed, push and turn
the MENU knob to move the b mark to VF DISP 2,
then push the MENU knob.
If a different page is displayed, turn the MENU knob
until the VF DISP 2 page appears, then push the
MENU knob.
The current settings appear on the right side of each
item.
3
Turn the MENU knob to move the
FREEZE, then push the MENU knob.
b
mark, and the ? mark
b
mark, and the ? mark
b
mark to DISP