Table of Contents
Advertisement
USER
No.
Page
menu
21
UMID SET
1) This item is displayed when an optional HKDW-702 is installed.
2) When either 50i or 25PsF is selected, this item is not displayed.
3) When 59.94i is selected, the maximum setting is 7SEC.
When either 50i or 25PsF is selected, the maximum setting is 8SEC.
4) When 59.94i is selected, the maximum setting is 40 MIN.
When either 50i or 25PsF is selected, the maximum setting is 48 MIN.
5) This item is displayed when an optional HKDW-905 is installed.
6) The shutter speed depends on the selected frame frequency. See "4-2-1 Shutter Modes" on page 61.
7) When either 50i or 59.94i is selected, OFF is the default setting.
When 25PsF is selected, 1/50 is the default setting.
8) When Y is selected in the camcorder with an optional HKDW-702, the color signal is output from the connector whose selected output signal is an SD signal.
PAINT Menu
The following table lists and describes the items in the
PAINT menu.
When the setting range in the Settings column is
surrounded by parentheses ( ), the setup value is a relative
No.
Page
P01
SW STATUS
150
Menu List
Item
EX-OWNERSHIP REC
COUNTRY CODE
ORGANIZATION
USER CODE
INSTANCE NO
TIME ZONE
MACHINE
Item
Settings
GAMMA
OFF/ON
BLACK GAMMA
OFF/ON
MATRIX
OFF/ON
KNEE
OFF/ON
WHITE CLIP
OFF/ON
DETAIL
OFF/ON
APERTURE
OFF/ON
FLARE
ON/OFF
EVS
OFF/ON
TEST SAW
OFF/ANALG/
DIGIT
Settings
Default
OFF/ON
OFF
4 alphanumeric
—
characters
4 alphanumeric
—
characters
4 alphanumeric
—
characters
RND/GEN
RND
00 to 25, 1A to 1F, 2A
00
to 2F, 32, 3A to 3F
n
—
value. The setting range shown on the menu screen may
differ from what is shown in the manual.
Default Description
ON
Turns the gamma correction on/off.
OFF
Turns the black gamma correction on/off.
OFF
Turns the linear matrix correction on/off.
ON
Turns the knee correction on/off.
ON
Turns the white clipping correction on/off.
ON
Turns the detail signal on/off.
ON
Turns the aperture function on/off.
ON
Turns the flare function on/off.
OFF
Turns the EVS shutter on/off.
OFF
Selects the test signal.
Description
See "5-3-8 Using AMID Data"
on page 99.
Advertisement
Table of Contents
