Table of Contents
Advertisement
4-4-3 Input Level of Audio Channels
CH-3 and CH-4
Selecting the audio input signals to be
recorded
You can select the audio input signal to be recorded for
audio channels CH-3 and CH-4 by using the AUDIO IN
CH-3/CH-4 switches.
F: In stereo recording, the audio signal
of the L channel is recorded.
In monaural recording, the monaural
audio signal is recorded.
R: The audio signal input to the AUDIO
IN CH1 connector is recorded.
W: The audio signal of the wireless
microphone is recorded.
F: In stereo recording, the audio signal
of the R channel is recorded.
In monaural recording, the monaural
audio signal is recorded.
R: The audio signal input to the AUDIO
IN CH2 connector is recorded.
W: The audio signal of the wireless
microphone is recorded.
Audio signals to be recorded on audio channels 3 and 4
Adjusting the audio recording level
Note
When 1 and 2 are displayed under the audio channel
level meters, the CH-1/CH-2 /CH-3/CH-4 switch is set to
CH-1/2. Set this switch to CH-3/4.
You can adjust the input level of audio channels CH-3 and
CH-4 by using the AUDIO SELECT CH3, AUDIO
SELECT CH4, LVL CONTROL CH3 and LVL
CONTROL 4 items on the AUDIO-3 page of the
MAINTENANCE menu.
1
Set the MENU ON/OFF switch to ON while pushing
the MENU knob.
The TOP menu appears.
2
Turn the MENU knob to move the
MAINTENANCE, then push the MENU knob.
When the MAINTENANCE menu is used for the first
time, the CONTENTS page appears.
Or, if you have used the MAINTENANCE menu
before, the page that was on the screen when the last
menu operation ended appears.
3
4
b
mark to
When the CONTENTS page is displayed, push the
MENU knob once, and then turn the MENU knob to
b
move the
mark to AUDIO-3, then push the MENU
knob again.
When any page of the MAINTENANCE menu is
displayed, turn the MENU knob until the AUDIO-3
page appears, then push the MENU knob.
The AUDIO-3 page appears.
Select the method to be used to adjust the audio input
level of audio channels CH-3 and CH-4.
To adjust the audio input level automatically
1 Turn the MENU knob to move the
channel to be adjusted automatically, then push the
MENU knob.
When adjusting the audio input level of
audio channel 3
2 Turn the MENU knob to display AUTO, then push
the MENU knob.
To adjust the audio input level manually
1 Turn the MENU knob to move the
channel to be adjusted manually, then push the
MENU knob.
When adjusting the audio input level of
audio channel 3
2 Turn the MENU knob to display MANU, then push
the MENU knob.
3 Turn the MENU knob to move the
CONTROL CH3, then push the MENU knob.
b
mark to the
b
mark to the
b
mark to LVL
69
Adjusting the Audio Level
Advertisement
Table of Contents
