Table of Contents
Advertisement
The menu page accessed last appears on the
viewfinder screen.
2
Turn the MENU knob until the SET STATUS page
appears, then push the MENU knob to select the page.
The current setting of each item appears on the right of
the item.
Item
Description
STATUS
Selects whether or not the ABNORMAL
ABNORMAL
window is displayed (ON or OFF).
STATUS
Selects whether or not the FUNCTION
FUNCTION
window is displayed (ON or OFF).
STATUS
Selects whether or not the STATUS
AUDIO
AUDIO window is displayed (ON or
OFF).
3
b
Turn the MENU knob to move the
mark to the item
you want to set, then push the MENU knob.
b
The
mark on the left of the selected item changes to
a z mark, and the z mark on the left of the setting
changes to a ? mark.
4
Turn the MENU knob to select whether or not to
display the selected window, then push the MENU
knob.
b
The z mark returns to a
mark, and the ? mark
returns to a z mark.
5
To continue setting other windows, repeat steps 3 and
4.
6
To end the menu operation, set the MENU ON/OFF
switch to OFF.
5-2-10 Confirming the Image of the
Return Video Signal in the
Viewfinder
The GENLOCK page of the MAINTENANCE menu
allows you to set whether or not to see the image of the
return video signal in the viewfinder. You can confirm only
the image of HD-Y return video signal.
1
Set the MENU ON/OFF switch to ON while holding
down the MENU knob.
The TOP menu appears.
2
b
Turn the MENU knob to move the
mark to
MAINTENANCE, then push the MENU knob.
If this is the first time the MAINTENANCE menu has
been displayed, the CONTENTS page of the
MAINTENANCE menu appears.
If the menu has been used before, the page accessed
last appears.
3
If the CONTENTS page is displayed, push the MENU
b
knob once, then turn the MENU knob to move the
mark to GENLOCK, then push the MENU knob again
to display the GENLOCK page.
If a different page is displayed, turn the MENU knob
until the GENLOCK page appears, then push the
MENU knob to select the page.
The current setting of each item appears on the right of
the item.
4
Carry out setting operations as follows:
b
1 Turn the MENU knob to move the
mark to
GENLOCK, then push the MENU knob.
b
The
mark on the left of GENLOCK changes to a
z mark, and the z mark on the left of the
GENLOCK setting changes to a ? mark.
2 Turn the MENU knob until OFF appears, then push
the MENU knob.
b
The z mark returns to a
mark, and the ? mark
returns to a z mark, and the setting is executed.
b
3 Turn the MENU knob to move the
mark to
RETURN VIDEO, then push the MENU knob.
b
mark changes to a z mark, and the z mark
The
changes to a ? mark.
4 Turn the MENU knob until ON appears, then push
the MENU knob.
b
The z mark returns to a
mark, and the ? mark
returns to a z mark, and the setting is executed.
5
To end the menu operation, set the MENU ON/OFF
switch to OFF.
Page 91
Advertisement
Table of Contents
