Setting The Shot Id - Sony HDW-790P Operation Manual

MENU knob
1
Set the MENU ON/OFF switch to ON.
The menu page accessed last appears on the
viewfinder screen.
2
Turn the MENU knob until the SHOT DISP page
appears, then push the MENU knob to select the page.
The current setting of each item appears on the right of
the item.
Item Description
SHOT DATE Selects whether or not the shot date is
superimposed (ON or OFF).
SHOT TIME Selects whether or not shot time is
superimposed (ON or OFF).
SHOT MODEL Selects whether or not the model name
NAME is superimposed (ON or OFF).
SHOT SERIAL Selects whether or not the serial
NO number is superimposed (ON or OFF).
SHOT ID SEL Selects whether or not the shot ID set
on the SHOT ID
superimposed (1 to 4 or OFF).
SHOT BLINK Selects whether or not a blinking * is
CHARA superimposed (ON or OFF).
1) To carry out superimposed recording, select the SHOT ID number (1
to 4). To record without superimposing the SHOT ID, select "OFF."
3
Turn the MENU knob to move the
you want to set, then push MENU knob.
b
The mark on the left of the selected item changes to
a z mark, and the z mark on the left of the setting
changes to a ? mark.
4
Turn the MENU knob to select whether or not to
record the selected item superimposed on the color
bars, then push the MENU knob.
88
Status Display on the Viewfinder Screen
CANCEL/PRST /
ESCAPE switch
MENU ON/OFF switch
1)
page is
b
mark to the item
The z mark returns to a
returns to a z mark.
5
To continue setting other items, repeat steps 3 and 4.
6
To end the menu operation, set the MENU ON/OFF
switch to OFF.
Carrying out superimposed recording
To actually record the items selected for superimposed
recording on the SHOT DISP page, set the OUTPUT/DCC
switch to BARS.
The items selected for superimposed recording appear on
the screen and are recorded superimposed on the color
bars.

5-2-8 Setting the Shot ID

On the SHOT ID page of the USER menu, you can set a
shot ID of up to 12 alphanumeric characters, spaces, and
symbols.
When the OUTPUT/DCC switch is set to BARS, this shot
ID is output with the color bar signal. The shot ID
comprises ID1 to ID4, and you can select the SHOT ID to
be recorded using the SHOT DISP page.
For detailed information on the OUTPUT/DCC switch
position, see "OUTPUT/DCC (output signal/dynamic
contrast control) switch" on page 23.
Note
When the menu is displayed, the shot ID is not displayed,
even if the color bar signal is output.
MENU knob MENU ON/OFF switch
1
Set the MENU ON/OFF switch to ON.
The menu page accessed last appears on the screen.
2
Turn the MENU knob until the SHOT ID page
appears, then push the MENU knob to select the page.
b
mark, and the ? mark
CANCEL/PRST /
ESCAPE switch