Standby Settings; Standby Control; Standby Delay - Cisco TelePresence EX60 Administrator's Manual

Cisco TelePresence System EX Series
Contents

Standby settings

Standby Control

Determine whether the system should go into standby mode or not.
Requires user role: ADmIn
Value space: <off/on>
Off: The system will not enter standby mode.
On: Enter standby mode when the Standby Delay has timed out. requires the Standby Delay
to be set to an appropriate value.
Standby Control: On
Example:

Standby Delay

Define how long (in minutes) the system shall be in idle mode before it goes into standby mode.
requires the Standby Control to be enabled.
Requires user role: ADmIn
Value space: <1..480>
Range: Select a value from 1 to 480 minutes.
Standby Delay: 10
Example:
D14726.15 EX Series Administrator Guide TC7.2, AUGUST 2014.
Introduction Web interface System settings System settings
www.cisco.com — Copyright © 2010–2014 Cisco Systems, Inc. All rights reserved.
98
Administrator Guide
Setting passwords Appendices