Cisco TelePresence System EX Series
Accessing call information
A call state indicator is available in the top bar in the web
interface. It shows whether the system is in a call or not, and
how many calls it is engaged in. you may also be notified
about incoming calls.
D14726.15 EX Series Administrator Guide TC7.2, AUGUST 2014.
Incoming call notification
As default, a notification is given when the
system receives a call.
Check this box, if you do not want to receive
Opening the Call Control page
Open Call Control
to go straight to the
www.cisco.com — Copyright © 2010–2014 Cisco Systems, Inc. All rights reserved.
Call state indicator
The call state indicator is
available on all pages except
The badge indicates the number
of active calls. If the system is
idle, there is no badge.
Click the indicator to get more
details about connected calls.
Use these buttons to:
Show call details
Put the call on hold
Disconnect the call