Audio Volumeheadset - Cisco TelePresence EX60 Administrator's Manual

Cisco TelePresence System EX Series
Contents

Audio VolumeHeadset

Set the volume on the headset. This setting is obsoleted by the Audio DefaultHeadsetVolume
setting.
Requires user role: USEr
Value space: <0..100>
Range: The value goes in steps of 5 from 0 to 100 (from -34.5 dB to 15 dB). Value 0 = off.
Audio VolumeHeadset: 70
Example:
Audio Volume
Set the speaker volume. This setting is obsoleted by the Audio DefaultVolume setting.
Requires user role: USEr
Value space: <0..100>
Range: The value must be between 0 and 100. The values from 1 to 100 correspond to the
range from -34.5 dB to 15 dB (0.5 dB steps). The value 0 means that the audio is switched
off.
Audio Volume: 50
Example:
D14726.15 EX Series Administrator Guide TC7.2, AUGUST 2014.
Introduction Web interface System settings System settings
www.cisco.com — Copyright © 2010–2014 Cisco Systems, Inc. All rights reserved.
60
Administrator Guide
Setting passwords Appendices