Changing The System Password - Cisco TelePresence EX60 Administrator's Manual

Cisco TelePresence System EX Series
Contents

Changing the system password

It is mandatory to set a password for a user with
ADmIn rights in order to restrict access to system
configuration. This includes the default admin user.
A warning, saying that the system password is not set, is
shown on screen until you set a password.
you can read more about passwords in the
► Setting passwords chapter.
D14726.15 EX Series Administrator Guide TC7.2, AUGUST 2014.
Introduction Web interface Web interface
1. Open the Change Password dialog
Hover the mouse over your the name, and
choose Change password
2. Set the new password
Enter your current and new passwords as
requested, and click
change to take effect.
If the password currently is not set, leave
the Current password
System settings
in the drop-down list.
Change password for the
field blank.
13
Setting passwords
www.cisco.com — Copyright © 2010–2014 Cisco Systems, Inc. All rights reserved.
Administrator Guide
Appendices