Cisco TelePresence EX60 Administrator's Manual page 105

Cisco TelePresence System EX Series
Contents
Video Input DVI [2]/[1] Type
noTE: EX90 has the DVI 2 input connector and EX60 has the DVI 1 input connector.
The official DVI standard supports both digital and analog signals. In most cases the default
AutoDetect setting can detect whether the signal is analog rGB or digital. However, in some
rare cases when DVI-I cables are used (these cables can carry both the analog and digital
signals) the auto detection fails. This setting makes it possible to override the AutoDetect and
select the correct DVI video input.
Requires user role: ADmIn
Value space: <AutoDetect/Digital/AnalogrGB/AnalogyPbPr>
AutoDetect: Set to AutoDetect to automatically detect if the signal is analog rGB or digital.
Digital: Set to Digital to force the DVI video input to Digital when using DVI-I cables with both
analog and digital pins and AutoDetect fails.
AnalogRGB: Set to AnalogrGB to force the DVI video input to AnalogrGB when using DVI-I
cables with both analog and digital pins and AutoDetect fails.
AnalogYPbPr: Set to AnalogyPbPr to force the DVI video input to AnalogyPbPr, as the
component (yPbPr) signal cannot be auto detected.
Video Input DVI 2 Type: AutoDetect
Example:
Video Input HDMI [1] RGBQuantizationRange
noTE: Applies only to EX90.
All devices with HDmI inputs should follow the rules for rGB video quantization range defined in
CEA-861. Unfortunately some devices do not follow the standard and this configuration may be
used to override the settings to get a perfect image with any source.
Requires user role: ADmIn
Value space: <Auto/Full/limited>
Auto: rGB quantization range is automatically selected based on the rGB Quantization
range bits (Q0, Q1) in the AVI infoframe. If no AVI infoframe is available, rGB quantization
range is selected based on video format according to CEA-861-E.
Full: Full quantization range. The r, G, B quantization range includes all code values (0 -
255). This is defined in CEA-861-E.
Limited: limited Quantization range. r, G, B quantization range that excludes some code
values at the extremes (16 - 235). This is defined in CEA-861-E.
Video Input 1 HDMI 1 RGBQuantizationRange: Auto
Example:
D14726.15 EX Series Administrator Guide TC7.2, AUGUST 2014.
Introduction Web interface System settings System settings
Video Input Source [1..3]/[1..2] Name
noTE: EX90 has Video Input Source [1..3] and EX60 has Video Input Source [1..2].
Enter a name for the video input source.
Requires user role: ADmIn
Value space: <S: 0, 50>
Format: String with a maximum of 50 characters.
Video Input Source 1 Name: ""
Example:
Video Input Source [1] Connector
Select which video input connector to be active on video input source 1.
Requires user role: ADmIn
Value space: <HDmI>/<DVI>
HDMI (EX90): Select HDmI when you want to use the HDmI as the video input source 1.
DVI (EX60): Select DVI when you want to use the DVI as the video input source 1.
Video Input Source 1 Connector: HDMI
Example:
Video Input Source [2] Connector
Select which video input connector to be active on video input source 2.
Requires user role: ADmIn
Value space: <DVI>/<CAmErA>
DVI (EX90): Select DVI when you want to use the DVI-I as input source 2.
CAMERA (EX60): Select CAmErA when you want to use the camera as input source 2.
Video Input Source 2 Connector: DVI
Example:
Video Input Source [3] Connector
noTE: Applies only to EX90.
Select which input connector to be active on video input source 3.
Requires user role: ADmIn
Value space: <CAmErA>
CAMERA: Select CAmErA when you want to use the camera as input source 3.
Video Input Source 3 Connector: CAMERA
Example:
www.cisco.com — Copyright © 2010–2014 Cisco Systems, Inc. All rights reserved.
105
Administrator Guide
Setting passwords Appendices