Restarting The System - Cisco TelePresence EX60 Administrator's Manual

Cisco TelePresence System EX Series
Contents

Restarting the system

The system can be shut down or restarted remotely using the
web interface.
D14726.15 EX Series Administrator Guide TC7.2, AUGUST 2014.
Introduction Web interface Web interface
Navigate to: Maintenance > Restart
Restarting the system
Click Restart TelePresence device...
restart the system.
It will take a few minutes before
the system is ready for use.
System settings
to
Shutting down the system
Click Shutdown TelePresence device...
to shut down the system.
The system cannot be turned on
again remotely; you must press
its power button physically to
turn it on.
www.cisco.com — Copyright © 2010–2014 Cisco Systems, Inc. All rights reserved.
53
Administrator Guide
Setting passwords Appendices