Download Print this page
   

Advertisement

Advertisement

   Related Manuals for Cisco EX60

   Summary of Contents for Cisco EX60

  • Page 1: Table Of Contents

    Switching On The Touch Panel Adjusting the Camera Making a Call Manually Dialling a Number Ending a Call During a Call Sharing a Presentation Far End Camera Control Troubleshooting Further Information Cisco EX Series User Guide Software Version TC4.2 Version 1.0...

  • Page 2: Getting Started

    Connecting the System Getting Started The Cisco EX60 and EX90 are high definition desktop video conferencing Data systems. They consist of an LCD screen with build in camera and a touch If the unit is not already Connection screen input panel.

  • Page 3: The Touch Panel

    The Touch Panel Adjusting the Camera The system is controlled using the touch panel. To wake the system up, simply The camera has a built in privacy shutter. To operate the shutter, hold the outer touch the panel. edge of the camera and rotate the ring. To adjust the vertical alignment of the camera, simply tilt it up and down manually.

  • Page 4: Making A Call

    Making a Call Manually Dialling a Number To make a call, press the Call button on the touch panel. This displays the call box. Tap the Search or Dial box. Start typing the address of the system you want. To dial a pre-programmed number, select either favourites, the system directory or your call history.

  • Page 5: Ending A Call

    Ending a Call Sharing a Presentation To end a call, tap the End button or hang up the handset. To share a presentation from a computer or laptop, you must first connect the device to the video conferencing system. On laptops, simply plug the cable supplied into the laptop and use the appropriate function key to change the During a Call display settings.

  • Page 6: Far End Camera Control 11

    PC image does not display  Check the PC screen resolution. For a list of acceptable resolutions, please consult the system documentation found at: http://www.cisco.com/ en/US/docs/telepresence/endpoint/ex-series/tc4/user_guide/ ex90_user_guide_tc42.pdf.  Use the function keys on the laptop to change the video outputs.

  • Page 7: Further Information 13

    Try using 9 or 3 or ask your local support team. Please note, this will only work if your local health board supports this option. Further Information For further information please consult the official user guide at: http://www.cisco.com/en/US/docs/telepresence/endpoint/ex-series/tc4/ user_guide/ex90_user_guide_tc42.pdf...

This manual also for:

Ex90

Comments to this Manuals

Symbols: 0
Latest comments: