The 802.1X Screen - ZyXEL Communications XMG3512-B10A User Manual

6.5 T he 802.1x Sc re e n
You can view and configure the 802.1X authentication settings in the
>
Se tting Bro a db a nd
Network Setting > Broadband > 802.1x
Fig ure 29
The following table describes the labels in this screen.
Table 15 Network Setting > Broadband > 802.1x
L ABEL
#
Status
Interface
EAP Identity
EAP method
Bidirectional
Authentication
Certificate
Trusted CA
Modify
Chapter 6 Broadband
> to display the following screen.
802.1x
DESC RIPT IO N
This is the index number of the entry.
This field displays whether the authentication is active or not. A yellow bulb signifies that this
authentication is active. A gray bulb signifies that this authentication is not active.
This is the interface that uses the authentication. This displays
assigned.
This shows the EAP identity of the authentication. This displays
assigned.
This shows the EAP method used in the authentication. This displays
method assigned.
This shows whether bidirectional authentication is allowed.
This shows the certificate used for this authentication. This displays
certificate assigned.
This shows the Trusted CA used for this authentication. This displays
CA assigned.
Click this icon to edit an item.
XMG3512-B10A User's Guide
76
screen. Click
802.1x Ne two rk
when there is no interface
N/ A
when there is no EAP identity
N/ A
when there is no EAP
N/ A
when there is no
N/ A
when there is no Trusted
N/ A