The 802.1X Screen - ZyXEL Communications XMG3512-B10A User Manual

6.5 The 802.1x Screen

You can view and configure the 802.1X authentication settings in the 802.1x screen. Click Network
Setting > Broadband > 802.1x to display the following screen.
Figure 29 Network Setting > Broadband > 802.1x
The following table describes the labels in this screen.
Table 15 Network Setting > Broadband > 802.1x
LABEL
#
Status
Interface
EAP Identity
EAP method
Bidirectional
Authentication
Certificate
Trusted CA
Modify
Chapter 6 Broadband
DESCRIPTION
This is the index number of the entry.
This field displays whether the authentication is active or not. A yellow bulb signifies that this
authentication is active. A gray bulb signifies that this authentication is not active.
This is the interface that uses the authentication. This displays N/A when there is no interface
assigned.
This shows the EAP identity of the authentication. This displays N/A when there is no EAP identity
assigned.
This shows the EAP method used in the authentication. This displays N/A when there is no EAP
method assigned.
This shows whether bidirectional authentication is allowed.
This shows the certificate used for this authentication. This displays N/A when there is no
certificate assigned.
This shows the Trusted CA used for this authentication. This displays N/A when there is no Trusted
CA assigned.
Click this icon to edit an item.
XMG3512-B10A User's Guide
77