The Reinforcement Unit - Oce PlotWave 750 Operation Manual

The reinforcement unit

Introduction
If you install a reinforcement unit, output can be delivered with a pre-punched, self-adhesive
strip, see the illustration below.
[65] Example of a reinforcement unit
With this strip the copy can be stored in a binder, without running the risk that the punching
holes tear out. You can unfold a folded map in a binder without opening the binder mechanism,
see figure below.
[66] Example of a folded map
The optional reinforcement unit supports all media sizes larger than A4.
See The reinforcement unit maintenance on page 269
new tape roll and other maintenance issues.
NOTE
Reinforcement is only possible with the Standard folding method.
Enable reinforcement
Procedure
1.
Enter the IP address or host name of the printer in a web browser to open Océ Express WebTools
2.
Log on as key operator or power user.
3.
Click [Preferences] - [Print job defaults] - [Folding] - [Bind or reinforce]
4.
Select reinforcement to enable the reinforcement option.
for more information about inserting a
Chapter 6 - The finishing options
The reinforcement unit
217