Oce PlotWave 750 Operation Manual page 128

Define a scan-to-file template
In setting group
[Scan template 3: Check print]
2. Click "Edit" in the settings group bar or click on the value of a single setting.
3. Click [OK] to confirm your entries or [Cancel] to reject your entries.
Once you have enabled the [File (scan-to-file)] option and set your preferred [Destination], you
can copy with a scan-to-file template. You can now start a scan job from the scanner operator
panel. For more information, see
128 Chapter 3 - Define your workflow with Océ Express WebTools
Action
Define whether a check plot is made for each
scanned file and how the check prints are or-
dered (by set or by page).
Introduction to scan-to-file jobs on page
NOTE
The [Scan template 3: Check print]
options are available for [Black/
white] scans only.
194.