Oce PlotWave 750 Operation Manual page 39

No.
3
4+5
6
The display
The graphical (LCD) display offers feedback about the current printer status. It provides you with
the following information.
• Status information (e.g. "Preparing for run" or "Ready to print"). During normal operation the
following message types may appear:
-Status/action message: indicates the actual status of the printer plus the action to be taken,
e.g. "Roll empty. Feed A2, plain paper".
-Warning message: during a warning message the printer will continue to operate, but it is
possible that the print quality is not optimal, e.g. 'Fill toner'.
-A graphical overview of available rolls and sheet feeders, including the material type and size
used by each roll or sheet feeder.
• A symbol indicating the paper orientation (for cut sheet tray only).
• An indication that a particular roll or cut sheet tray is empty. An empty roll is represented by a
dotted roll symbol. An empty cut sheet tray is displayed as an empty paper tray.
• In the event of an error, a graphical representation of any error location (cover or panel) is
displayed together with instructions on how to solve the problem.
Key types Function
Stop key The red stop key is used to stop the present print job. After
this key is pressed, a dialog will be displayed asking for confir-
mation.
Selection keys The selection keys are located immediately below the graphi-
cal display.
• The left key can be used to activate one of the main menu
choices (Language, Folding or Media) on the left part of the
display.
• The right selection key can be used to activate the options
on the right part of the graphical display.
Online key Use the Online key to put the printer online or offline. If the
green light above the Online key is on, the printer is online; if
this light is off, the printer is offline.
NOTE
The printing process does not stop immediately
since a number of prints may already have been
submitted to the printer after processing. The prints
cannot be stopped.
NOTE
A shadow highlighting effect is used to indicate the
active menu option.
NOTE
To identify the active selection, the dotted line
around this selection is changed into an uninterrup-
ted line and the small selection triangles next to the
specified option are no longer dimmed. These selec-
tion triangles indicate that you can select an option
from a predefined list with the help of the Up/Down
key.
The printer operator panel
Chapter 2 - Introduction 39