Use Ftp To Send A Print Job - Oce PlotWave 750 Operation Manual

Use FTP to send a print job

Introduction
The Océ PlotWave 750 supports printing through FTP.
If you send your print job through FTP, the default Océ Express WebTools settings are used if the
setting is missing in the print job.
NOTE
You must enable printing through FTP in the Océ Express WebTools.
How to send a print job via FTP
You can print the files through FTP in the following ways.
• Via a command line prompt
• Enter the address ftp://<hostname or IP address> /jobs in your workstation browser.
• Via an FTP application
• From a Web browser
The Océ PlotWave 750 has a dedicated FTP Jobs folder. You cannot delete or change this folder.
It is created at installation and protected. The most convenient way to print files through FTP is to
drag and drop the files or to copy and paste the files, into this [Jobs] folder on the FTP site of
your Océ PlotWave 750 controller. The documents in the folder are printed on the Océ PlotWave
750.
Web browsers that support job submission through FTP
Level of functionality
Supports drag and drop of
files
Supports copy and paste of
files.
Web browser
®
Microsoft Internet Explorer
Mozilla Firefox™
®
Microsoft Internet Explorer
Mozilla Firefox™
Chapter 4 - Use the Océ PlotWave 750 to print
Use FTP to send a print job
Operation
Drag the jobs into the [Jobs]
folder on the FTP site of your
Océ PlotWave 750.
Paste the jobs into the [Jobs]
folder on the FTP site of your
Océ PlotWave 750.
149