Oce PlotWave 750 Operation Manual page 124

Define the stamps for copy
In setting group
[Copy template 1:
Folding]
[Copy template 1:
Binding]
2.
Click [Edit] in the settings group bar or click the value of a single setting.
3.
Click [Ok] to confirm your entries or [Cancel] to reject your entries.
Define the stamps for copy
Procedure
1. Open the [Templates] - [Stamps] tab
2. Select the font to use on stamps
3.
Enable a stamp
4.
Type in a stamp name
5.
Enter the text to display on the stamp. You can type in:
• Free text
• %DATE: to print the date of the copy on the copy
• %TIME: to print the time when the copy is made
124 Chapter 3 - Define your workflow with Océ Express WebTools
Action
Set the finishing options for the copy:
The folding and the additional binding strip when any.
NOTE
This option depends on your system configuration (with a
'first fold' or a 'full fold' folder)