Oce PlotWave 750 Operation Manual page 77

Settings group
[Regional settings]
[Current date and time]
[Print queue management]
[Smart Inbox management]
[Logging and accounting]
[System properties]
[Separation sheet]
[Printer properties]
[Folder properties]
[Océ Double Decker Pro: Tray selec-
tion]
[Scanner properties]
[Scanner zoom steps]
[Memory]
2. Click [Edit] in the settings group bar or click the value of a single setting.
3. Click [Ok] to confirm your entries or [Cancel] to reject your entries.
Description
The regional settings are configured during the installa-
tion of your system. Here you can change the initial con-
figuration.
NOTE
You can toggle between the [First language]
and the [Second language] on the printer or
scanner operator panel.
NOTE
Every time you change the [Measurement
unit], the controller recalculates the values
from millimeter to inches and vice versa. If you
reverse to the original value of this setting a
slight calculation difference can occur due to
rounding differences.
Define the time zone, date and time of the system.
Define how jobs are managed in the print queue.
Define how jobs are managed in the Smart Inboxes.
Define logging and accounting data.
Define when the system is turned on or off.
Define whether a separation sheet is used after each job
or set
Define the general printer behavior.
Define the general folder behavior. Only available if a
folder is installed.
Define the general Océ Double Decker (Pro) behavior.
Only available if an Océ Double Decker (Pro) is installed.
Define the general scanner behavior. Only available if a
scanner is installed.
Define the default zoom settings for the scanner. Only
available if a scanner is installed.
Define the [Orange zone limit] and the [Red zone limit] of
the set memory, when the system must warn about
missing free space.
Chapter 3 - Define your workflow with Océ Express WebTools
Define the system preferences
77