Use Ftp To Send A Print Job - Oce PlotWave 300 User Manual

Use FTP to send a print job

Introduction
The Océ PlotWave 300 supports printing through FTP.
If you send your print job through FTP the default Océ Express WebTools settings are
leading.
Note:
You must enable printing through FTP in the Océ Express WebTools.
How to send a print job via FTP
You can print the files through FTP in the following ways.
Via a command line prompt
Enter the address ftp://<hostname or IP address> /jobs in your workstation browser.
Via an FTP application
From a Web browser
The Océ PlotWave 300 has a dedicated FTP Jobs folder. You cannot delete or change
this folder. It is created at installation and protected. The most convenient way to print
files through FTP is to drag and drop the files or to copy and paste the files, into this
'Jobs' folder on the FTP site of your Océ PlotWave 300 controller. The documents in
the folder are printed on the Océ PlotWave 300.
Web browsers that support job submission through FTP
#
Level of functionality
Supports drag and drop of
files
Supports copy and paste
of files.
Web browser
®
Microsoft Internet Ex-
plorer 6.0 (or higher)
Mozilla Firefox™ 1.5 (or
higher)
®
Microsoft Internet Ex-
plorer 6.0 (or higher)
Mozilla Firefox™ 1.5 (or
higher)
Chapter 5 - Use the printing system
Use FTP to send a print job
Operation
Drag the jobs into the
'Jobs' folder on the FTP
site of your Océ PlotWave
300.
Paste the jobs into the
'Jobs' folder on the FTP
site of your Océ PlotWave
300.
161