Alto-Shaam ASF-75E Installation Operation & Maintenance page 48

O P E R A T I N G I N S T R U C T I O N S
T E M P E R AT U R E V E R I F I C AT I O N ( C O N T I N U E D )
1 . Press and hold the ON/OFF key for 1 second.
One of the following will appear in the alpha/numeric display:
Á
A. "READY" along with "- - - - " in the L.E.D. display.
The fryer is in the cooking range.
NOTE: For best results, do not cook product until the display is in this mode.
B. "HI TEMP"
The pot temperature is 40°F (4°C) or higher than the set-point.
C. "LO TEMP"
The pot temperature is 21°F (-6°C) or lower than the set-point.
D. "PROBLEM"
Indicates a heating problem.
E. "HOT"
The pot temperature is more than 410°F (210°C) or 395°F (202°C) for CE (European Community fryers).
F. "FIXPROBE"
The control has detected a problem in the temperature measuring circuit, including the probe.
NOTE: A decimal point " . " between L.E.D. digits 1 and 2 in either display indicates the control
is calling for heat.
IT IS RECOMMENDED THIS APPLIANCE
BE INSPECTED BY A QUALIFIED
SERVICE TECHNICIAN AT REGULAR
INTERVALS AS PART OF A STANDARD
KITCHEN MAINTENANCE PROGRAM.
DELUXE CONTROL
# 8 3 5 1 • A S F - 7 5 E E l e c t r i c F r y e r O p e r a t i o n & C a r e M a n u a l • 4 6