Alto-Shaam ASF-75E Installation Operation & Maintenance page 42

O P E R A T I N G I N S T R U C T I O N S
P R O G R A M M I N G T H E C O N T R O L
The Basket Lift program provides the operator with the ability to enable or disable the
"BsktLift"
automatic basket lift function. In the "ON" position, the baskets will lift automatically as
O N
programmed in the selected product procedure. In the "OFF" position, both baskets will
BsktLift
remain in the raised position until manually dropped by the operator. This function is set
in the "ON" position as received from the factory. I T I S S T R O N G LY U R G E D T H AT
T H E " B S K T L I F T " R E M A I N AT T H I S S E T T I N G . If it is ever necessary to transition
from the disabled "OFF" position to the enabled "ON" position, the control display will
indicate "POWERDOWN" requiring the operator to perform a control shutdown in order to
synchronize the baskets with the revised state of the control.
Turn the Master Power Switch (located behind the front access door) to the "
Press the Up
Press the Right
setting will appear in the display. Press the Up
setting. When the correct setting appears, press the Right
DISPLAY FLASHES
setting option.
"LiftSync"
AVAILABLE ON DUAL
to raise both basket lifts simultaneously by selecting the "ON" position. The factory preset
ON
is in the "OFF" position for independent operation.
LiftSync
Press the Up
Press the Right
and Down
been made, press the Right
the Down
The temperature display can be shown in degrees Fahrenheit or Celsius.
"Temp F/C"
F
Press the Up
Press the Right
Temp F/C
setting will appear in the display. Press the Up
between "F" and "C." Press the Right
DISPLAY FLASHES
programming function.
To exit the control programming mode at any time, press and hold t
DELUXE CONTROL
or Down
arrow key to enter the program.
Press the Down
-
CONTROL FRYERS ONLY
or Down
arrow key to enter the program.
arrow keys to toggle between "ON" and "OFF." When the selection has
arrow key to advance the control to the next programming function.
or Down
arrow key to enter the program.
Press the Down
# 8 3 5 1 • A S F - 7 5 E E l e c t r i c F r y e r O p e r a t i o n & C a r e M a n u a l • 4 0
arrow keys to scroll until "BsktLift" appears in the display.
arrow key to advance the control to the next
. The "LiftSync" program provides the ability
arrow keys to scroll until "LiftSync" appears in the display.
arrow key to to confirm the selection.
arrow keys to scroll until "Temp F/C" appears in the display.
arrow key to accept the desired selection.
arrow key to advance the control to the next
DISPLAY STOPS FLASHING
or Down arrow keys to change the
arrow key to confirm.
DISPLAY STOPS FLASHING
DISPLAY FLASHES
DISPLAY STOPS FLASHING
or Down arrow keys to toggle
he LEFT
" position.
OFF
The previous
Press the Up
Press
The current
.
arrow key