Alto-Shaam ASF-75E Installation Operation & Maintenance page 45

P R O G R A M M I N G T H E C O N T R O L
"FILTER CNT" The filter count program allows the operator to change the number of processed fry loads
within a range of 5 to 15 before the monitor notifies the operator to service the
1 5
oil/shortening. The factory default is set at 15 loads.
Filter Cnt
MUST BE ACTIVATED IN ORDER TO MAKE THE
Press the Up
display. Press the Right
Press the Up
appears in the display. When the desired setting appears, press the Right
accept the selection. The display flashes. Press the Down
control to the next programming function.
"MAX TIME" provides notification when the temperature of the oil is
"MAX TIME"
lower than the set-point temperature. The factory set default is 3 minutes
3 : 0 0
and should not be adjusted by the operator. Press the Down
Max Time
to advance the control to the next programming function.
"HI TEMP" allows the operator to trigger an automatic fryer shut-down at a specified oil
"HI TEMP"
temperature within a range of 250°F to 450°F (121°C to 232°C). This safety
4 5 0 ° F
feature is provided in the event the actual oil temperature exceeds the oil
Hi Temp
set-point temperature due to equipment malfunction. The factory default
is set at 450°F (232°C).
Press the Up
Press the Right
Up
the display. When the desired temperature appears, press the Right
the selection. Press the Down
programming function.
O P E R A T I N G I N S T R U C T I O N S
DELUXE CONTROL
or Down
arrow key to enter the program. The display stops flashing.
or Down
or Down
arrow key to enter the program. The display stops flashing. Press the
or Down arrow keys to scroll until the desired shut-down temperature appears in
# 8 3 5 1 • A S F - 7 5 E E l e c t r i c F r y e r O p e r a t i o n & C a r e M a n u a l • 4 3
"FILTER CNT"
arrow keys to scroll until "FILTER CNT" appears in the
arrow keys to until the desired number of processed loads
arrow keys to scroll until "HI TEMP" appears in the display.
arrow key to advance the control to the next
"FILTER"
THE MONITOR PROGRAM
PROGRAM FUNCTIONAL
arrow key to advance the
arrow key
arrow key to accept
.
arrow key to
LoTemp
HOT