Alto-Shaam ASF-75E Installation Operation & Maintenance page 36

O P E R A T I N G I N S T R U C T I O N S
DELUXE CONTROL
P R O G R A M M I N G T H E C O N T R O L
"SetPoint
3 5 0 °F
This program allows the operator to change the temperature of the frypot oil/shortening.
SetPoint
The set-point temperature of the oil/shortening can be adjusted from a range of 250°F to
450°F (121°C to 232°C). The factory default is set at 350°F (177°C).
Press the Up or Down arrow keys to scroll until "SetPoint" appears in the display.
Press the right arrow key to enter the program. The display will stop flashing. The
previously set temperature will appear in the display. Press the Up or Down arrow
keys to change the setting. When the correct set-point appears, press the right arrow key
to confirm the setting. The display will flash. Press the down arrow key to advance
the control to the next program feature.
To exit the control programming mode at any time, press and hold t .
he LEFT arrow key
# 8 3 5 1 • A S F - 7 5 E E l e c t r i c F r y e r O p e r a t i o n & C a r e M a n u a l • 3 4