Alto-Shaam ASF-75E Installation Operation & Maintenance page 43

P R O G R A M M I N G T H E C O N T R O L
The language option is only available in English "ENG" at this time.
"Language"
The operator can choose to have the fryer oil temperature continuously shown in the
"TempDisp"
display during a product cooking sequence by selecting "ON" or to a normal display
O N
sequence by selecting "OFF." The function is set to "ON" at the factory.
TempDisp
Press the Up
Press the Right
setting of "ON" or "OFF" will appear in the display. Press the Up
keys to change the setting. When the correct setting appears, press the Right
to confirm the setting.
control to the next programming function.
The operator is able to set the volume of the fryer alarm to off, low, medium or high
"AlarmSet"
"OFF", "LO", "MED" or "HI." The alarm is set to "HI" when received from the factory.
H I
Press the Up
Alarm Set
Press the Right
setting will appear in the display. Press the Up
the available choices. When the correct setting appears, press the Right
confirm the setting.
to the next programming function.
The idle mode allows the operator to set a period of time during which the fryer is not
"IdleMode"
being used but still maintains full fryer oil temperature. When idle time expires, the fryer
3 0 : 0 0
oil temperature will drop to 250°F (121°C) at which point the oil/shortening must be
IdleMode
reheated before frying additional product. This time period can be adjusted between
"OFF" and 60:00 minutes. The factory default is set at 30 minutes idle time.
Press the Up
Press the Right
required, press the Down
or Down
Right
the control to the next programming function.
"IdleMode" can be interrupted at any time by pressing any of the 12
product preset keys. The fryer will immediately begin to preheat to
set-point temperature. The baskets can be dropped only after the
set-point temperature has been reached.
To exit the control programming mode at any time, press and hold t
O P E R A T I N G I N S T R U C T I O N S
DELUXE CONTROL
or Down
arrow key to enter the program.
DISPLAY FLASHES
or Down
arrow key to enter the program.
DISPLAY FLASHES
or Down
arrow key to enter the program.
arrow keys to change the setting. When the correct setting appears, press the
arrow key to confirm.
# 8 3 5 1 • A S F - 7 5 E E l e c t r i c F r y e r O p e r a t i o n & C a r e M a n u a l • 4 1
arrow keys to scroll until "TempDisp" appears in the display.
Press the Down
arrow keys to scroll until "AlarmSet" appears in the display.
Press the Down
arrow keys to scroll until "IdleMode" appears in the display.
arrow key until "OFF"appears in the display. Press the Up
DISPLAY FLASHES
DISPLAY STOPS FLASHING
or Down
arrow key to advance the
DISPLAY STOPS FLASHING
or Down arrow keys to toggle among
arrow key to advance the control
DISPLAY STOPS FLASHING
Press the Down arrow key to advance
he LEFT
E N G
Language
The current
arrow
arrow key
The current
arrow key to
If no idle time is
.
arrow key