Alto-Shaam ASF-75E Installation Operation & Maintenance page 44

O P E R A T I N G I N S T R U C T I O N S
P R O G R A M M I N G T H E C O N T R O L
The filter program is a monitor to notify the operator to service the oil/shortening after a
"FILTER"
specified number of product loads established and set in the filter count "FILTER CNT"
O F F
programming function. This feature is set to "OFF" at the factory.
Filter
PRODUCT LOADS CAN BE ADJUSTED BY THE OPERATOR THROUGH THE FILTER COUNT
PROGRAM
THE THREE SELECTIONS SHOWN AS SET BY THE OPERATOR
Filter
"ALRM"
Filter
"LocH"
Filter
To exit the control programming mode at any time, press and hold t
DELUXE CONTROL
.
FILTER COUNT WILL AUTOMATICALLY ADJUST FILTER MONITOR ALERTS TO ONE OF
When set to the "OFF" position,
"Off"
the filter monitor is disabled and will
O F F
notify the operator to service the oil/shortening.
NOT
Set to alarm "ALRM," this feature will provide an audible
alarm and the display will indicate "FILTER NOW" as a
A l r M
reminder to the operator after every 15 product loads or the
number of processed fry loads set by the operator in the "FILTER CNT"
program function. When set to "ALRM" additional fry loads can be
processed and the alarm can be silenced by pressing the "ON/OFF" power
key on the main control panel to the "OFF" position
When the program mode is changed to the lock "LOCH" position, an
audible alarm will sound and the fryer will become inoperable following
L o c H
the number of processed fry loads set by the operator in the "FILTER
CNT" program function. The control will only become operable after the
oil/shortening has been serviced.
Press the Up
the display. Press the Right
stops flashing. Press the Up
available choices. When the desired setting appears, press the Right
arrow key to accept the selection. The display flashes. Press the Down
arrow key to advance the control to the next programming function.
# 8 3 5 1 • A S F - 7 5 E E l e c t r i c F r y e r O p e r a t i o n & C a r e M a n u a l • 4 2
or Down arrow keys to scroll until "FILTER" appears in
arrow key to enter the program. The display
or Down
THE NUMBER OF
.
Filter Now
arrow keys to toggle among the
he LEFT arrow key
.