Alto-Shaam ASF-75E Installation Operation & Maintenance page 31

P R O G R A M M E D P R O D U C T K E Y O P E R AT I O N
5 . If shake-time has been programmed into the selected product:
"SHAKE"
0:10
Shake
NOTE: This function will not occur if shake time has not been programmed
6 . At the end of the cooking cycle...
"Done"
3:50
Done
"Hold Done"
7 .
0:30
Hold Done
NOTE: If no hold value has been programmed, the control will skip to item 8.
"READY"
8 .
3:50
Ready
DELUXE CONTROL
An alarm will sound during the cooking cycle at the
specified shake-time programmed. "SHAKE" will
-
˚
appear in the display. The basket will automatically
lift 50-percent and the display will count down from
the shake time programmed.
After shaking the product, both the alarm and display
can be cleared by pressing the selected product key.
The basket will automatically lower into the cooking
position and the cooking time will resume.
into the selected product.
The basket(s) will lift (
An alarm will sound.
F
°
The indicator light within the display will begin to flash.
To cancel the "DONE" alarm, press the illuminated product key. The
alarm will stop in 10 seconds. In 5-seconds, the display will revert to the
350°F (177°C) "READY" state if a hold value has not been programmed.
If a hold value has been entered into the cooking program, the control alarm
will sound and the basket will automatically lift. The hold time will be
F
°
displayed and countdown will begin. When the hold timer reaches 0, an alarm
will sound and the product indicator light within the display will flash.
Cancel the alarm by pressing the product key.
Á
The control will revert to the ready state.
"READY," will appear in the Alpha/Numeric Display.
F
°
The 4-digit display will indicate the operator set temperature
or the default set-point of 350°F (177°C).
# 8 3 5 1 • A S F - 7 5 E E l e c t r i c F r y e r O p e r a t i o n & C a r e M a n u a l • 2 9
O P E R A T I N G I N S T R U C T I O N S
ON LIFT EQUIPPED FRYERS ONLY
).