Alto-Shaam ASF-75E Installation Operation & Maintenance page 46

O P E R A T I N G I N S T R U C T I O N S
P R O G R A M M I N G T H E C O N T R O L
"LO BAND" provides an alarm notification when the temperature of the
"LO BAND"
oil is lower than the set-point temperature. The adjustment range is
2 1 °F
between 5°F and 100°F (3°C and 56°C) with a factory preset of 21°F (12°C).
Lo Band
Press the Up
Press the Right
Up
When the desired setting appears, press the Right
display flashes. Press the Down
programming function.
"HI BAND" provides an alarm notification when the temperature of the
"HI BAND"
oil becomes higher than the set-point temperature. The adjustment range
2 5 °F
is between zero and 100°F (38°C) with a factory preset of 25°F (14°C).
Hi Band
Press the Up
Press the Right
Up
When the desired setting appears, press the Right
display flashes. Press the Down
programming function.
The fryer control includes a melt function with
"MELT CT"
purpose of melting solid shortening at a continuous but slower rate to assure full
0 : 1 0
melt-down. The operator has the ability to control the
Melt Ct
and 00:60 seconds. The factory default is set for 10 seconds (00:10).
Press the Up
Press the Right
Up
the desired setting appears, press the Right
display flashes. Press the Down
programming function.
The "PREHEAT BAND" is used to prevent the oil temperature in the frypot from reaching
the actual set-point temperature in order to compensate for temperature override as the
"PREHEAT
BAND"
fryer calls for heat. This program feature is set to 10°F (6°C) at the factory.
1 0 °F
I t i s s t r o n g l y u r g e d t h a t t h e " P R E H E AT B A N D " r e m a i n a t t h i s s e t t i n g .
Preheat Band
To exit the control programming mode, press and hold t
DELUXE CONTROL
or Down
arrow key to enter the program. The display stops flashing. Press the
or Down arrow keys to scroll until the desired number appears in the display.
or Down
arrow key to enter the program. The display stops flashing. Press the
or Down arrow keys to scroll until the desired number appears in the display.
or Down
arrow key to enter the program. The display stops flashing. Press the
or Down arrow keys to scroll until the desired time appears in the display. When
# 8 3 5 1 • A S F - 7 5 E E l e c t r i c F r y e r O p e r a t i o n & C a r e M a n u a l • 4 4
arrow keys to scroll until "LO BAND" appears in the display.
arrow key to advance the control to the next
arrow keys to scroll until "HI BAND" appears in the display.
arrow key to advance the control to the next
ON
arrow keys to scroll until "MELT CT" appears in the display.
arrow key to accept the selection. The
arrow key to advance the control to the next
arrow key to accept the selection. The
arrow key to accept the selection. The
/ pulsed heating cycles for the
OFF
/ pulse rate between 00:01
ON OFF
he LEFT arrow key
Low Temp
Hi Temp
.